Ingersoll Rand HandKey II - Hand Geometry Recognition

Ingersoll Rand Hand Key II Stand Alone Biometric Hand Geometry System

The 'Intelligent' Biometric Stand Alone Access Control System

Functionality:
Once the system is installed and powered up and connected to the door locking device,  the system allows a supervisor to be enrolled on to the system with the use of an ID number, then 3 x hand geometry reads. 

Once the supervisor is enrolled they can enroll further employees on to the system.  The system is very easy to use, when a employee, staff member needs to gain access through the door they simpily type in their user ID number into the key pad on the top of the Handpunch Terminal and then insert their hand into the hand enclosure. Verification of a person is usally done in less than 1 second. Once a persons hand is verified
 the Hand geometry reader will allow the door to open.

The HandKey II Biometric Hand Geometry Door Access Reader can also be used with the Paxton Net2 P.C linked Access Control System

Specifications

Sizes: 
11.65 in (29.6 cm) high
8.85 in (22.3 cm) wide
8.55 in (21.7 cm) deep
Power: 
12 to 24 VDC or 12 to 24 VAC 50-60 Hz, 7 watts
Temperature Range:
14˚F to 140˚F (-10˚C to 60˚C) non-operating/storage
Weight:  6 lbs (2.7 kg)
32˚F to 113˚F (0˚C to 45˚C) operating
Relative Humidity:
(non-condensing)  5% to 85% non-operating/storage
20% to 80% operating
Verification Time:
In Less than one second 
Transaction Storage:  5120 transactions
Memory Retention: 
Up to 5 years via the standard internal lithium battery.
ID Number Length:  1 to 10 digits from keypad or card
User Capacity:
512 users expandable to 32,512 users
Template Size:  9 bytes
Alarm Monitoring:  Tamper, Door Forced, Duress
Event Monitoring:  There are a variety of monitoring options including events such as: Invalid ID, Time Zone Violation, ID Refused, Try Again, Power Failure
Time Zones:
62 user definable time zones
Unlimited holidays
Auxiliary Outputs: 
3 user definable
(open collector, 5 VDC present, sinks to ground, 100 mA max)
Auxiliary Inputs:
 2 user definable
(open collector, 5 VDC present, sinks to ground, 100 mA max)
Communications:
 RS-485 (4 and 2 wire)
RS-232 Serial Printer Support or network communications
Baud Rate:  300 to 28.8 Kbps
Card Reader Input:  Proximity, Wiegand, Magnetic Stripe, Bar Code
(5 VDC provided by HandReader)
Card Reader Output:  Wiegand, Magnetic Stripe, Bar Code
Duress Code:  1 leading digit (user definable)
Door Controls:  Request to Exit input (switch or keypad), Door Switch input, Door Lock output.
(open collector, 5 VDC present, sinks to ground, 100 mA max)
Options:  BB-200  Operational Battery Backup 
CR-2  Magnetic Stripe Card Reader Wall Mount 
DC-102  Data Converter 
EM-801  Memory Expansion - 9,728 users 
EM-803  Memory Expansion - 32,512 users 
EN-200  Ethernet Communications Module 
KP-201  Auxiliary Keypad 
MD-500  High Speed Internal Modem 
PROX  HID Proximity Reader 
WAR-EXT  1 year extended warranty
Additional
Waterproof Covers
Hurricaine