Bewacom is the perfect entrance phone for connection to a companys PABX switchboard analogue with built-in codelock and is suitable for out door use.
This door telecom system simply acts as an extension line to your current telephone system. By using the Bm3 the appropiate person/ department can be called on their arrival on site, also selection of numbers can be dialled from the BM3, for example a visitor presses B1 to dial reception on the BM3 intercom, on answer the receptionist is able then to speak to the visitor and let them gain access.
This is done by simpily pressing a number on his/her phone handset. Different extensions can also be dialled for after hours access etc.
Bewacom entrance phone for connection to a company's PABX switchboard (analogue) with built in codelock. An analogue extension for the internal telephone system (PABX). Built-in codelock with four codes. CCTV control and switch.
Techinical Information:
The telephones must be able to generate a standard tone signal (DTMF).
Interfaces:
Two analogue extension cables for PABX.
Housing:
Cast metal with Stainless Steel buttons and security lock. For flush – use BB5 flush showing unit.
Environment:
Indoor or outdoor use. In very exposed locations, use SH3 or SH1 rain cover.
IP Rating:
54
Temperature:
-35 to +50 °C. At 90% relative air humidity.
Voltage:
12 to 24 V AC/DC
Current:
60 mA in standby
Dimensions:
80 (W) x 200 (H) x 40 (D) mm.
Code capacity:
4
Inputs:
Exit button request with delay. Two separate for disabling two codes.
Outputs:
Voltage free relay contact, max 2 A 28 V DC. Tamper switch for alarm connection (normally closed). Relay for control of CCTV system.
Opening time:
01-99 secs programmable from keypad. (can be extended x10).
web design by kudos
